Chinese translation for "casing deformation"

套管变形

Related Translations:

terrace deformation:  阶地变形

nonlinear deformation:  非线性变形

reserved deformation:  预留变形量

deformation equation:  变形方程

field deformation:  场变形

deformation measure:  应变量度

inhomogeneous deformation:  不均匀变形非均匀变形

liquid deformation:  液体形变

deflection deformation:  挠曲变形

deformation mode:  变形形式

Example Sentences:

	1.	The actual applied results prove that this method is of validity and availability , it paves the way for further explaining casing deformation 实际应用结果验证了该方法的正确性和有效性，可为进一步解释套管变形奠定基础。
	2.	It can lead to not only quick wear and early failure of drill pipe but also the decrease of collapse resistance and burst resistance of casing string , which could cause casing collapse , casing deformation and casing leak , even well bore abandonment 其直接后果是：钻柱快速磨损，导致过早失效；套管磨损会降低套管柱的抗挤强度和抗内压强度，造成套管柱挤毁、变形及泄漏，严重时造成全井报废。
	3.	The surface of natural fracture ( crack ) is parallel to the orientation of maximum principal stress . the principle orientation of anisotropic permeability reservoirs agrees with the orientation of the maximum principle stress . many engineering problems ( e . g . bore - hole stability , casing deformation failure during drilling , reasonable arrangement of wells , the optimum design of hydraulic fracture and so on ) are influenced by the in - situ stress orientation 天然裂缝面和裂隙面与最大主应力方向平行；在各向异性低渗透率油田中主渗透率方向与最大水平主应力方向趋向一致：在钻井过程中井壁稳定性，套管变形和损坏，油田开发井网合理布置、水力压裂优化设计等都与地应力方向有关。
	4.	The software of analysis method of multi - armed caliper log imaging has been developed , and the on - site applied results show that the software can get the casing maximum drift diameter and effective drift diameter and simultaneously give the caliper hoop extension graph and cross section graph in arbitrary depth which can diagnose the sort and degree of casing deformation 摘要研制了多臂井径成像测井解释方法软件，现场应用结果表明：运行该软件可以解释得到套管最大通径、有效通径；同时给出任意深度井径周向展开图、横截面图，进而可判断套变的种类和程度。

Similar Words：

"casing cutter jar" Chinese translation, "casing cutter sinker" Chinese translation, "casing cutter wedge" Chinese translation, "casing cylinder" Chinese translation, "casing damage" Chinese translation, "casing department" Chinese translation, "casing depth" Chinese translation, "casing design chart" Chinese translation, "casing device" Chinese translation, "casing distortion" Chinese translation